Stainless steel insulation cup made of internal and external double stainless steel, the use of welding technology to combine the inner liner and shell together, and then vacuum technology to the inner liner and shell of the air in the sandwich to achieve the effect of vacuum insulation

Classification

Stainless steel insulation cup is divided into: ordinary insulation cup (boiling water poured into the insulation time is generally below three hours), vacuum insulation cup (through the evacuation process, can make boiling water insulation more than 8 hours)

Features

In fact, the vacuum insulation cup, the length of the insulation time depends on the structure of the cup and the thickness of the cup material.
Generally speaking, the thinner the cup material, the longer the insulation time. But the cup body is easy to touch bad and deformation, affecting the service life; vacuum cup liner outer layer of metal film and copper plating measures can also increase the degree of insulation; large capacity, small diameter of the vacuum cup insulation time is longer, on the contrary, small capacity, large diameter of the vacuum insulation cup insulation time is shorter; vacuum cup service life also depends on the cup inner layer of the clean and vacuum time, the most important is the structure of the vacuum furnace.
The society uses the vacuum vacuum insulation cup vacuum equipment are vacuum exhaust table and vacuum brazing furnace, there are about two types of four kinds. A class that has a tail vacuum exhaust table; another class brazing furnace type. Brazing furnace type is divided into: single chamber, multi-chamber, increase the pumping speed of multi-chamber.
Single chamber type overall vacuum brazing furnace. The cycle time of the vacuum of the furnace is long, if the manufacturer wants to improve the production efficiency and shorten the vacuum time, it will affect the service life of the cup. The service life of the cup is also only about 8 years. With tail vacuum cup exhaust table and the advantages: with tail exhaust that is produced with vacuum exhaust table vacuum cups, vacuum pumping heating temperature of about 500 ℃, the shell of the vacuum cup is not easy to deformation, but the copper tube welding is easy to touch leakage, in the semi-finished processing to special protection.
In addition a large category is the vacuum brazing furnace type, about three types, did not expect it, usually we use the vacuum insulation cups although in the appearance of the general insulation cups do not look different, in the production process vacuum insulation cups by the general insulation cups to be much more complex, technical difficulty is also much higher. Therefore, the vacuum insulation cup than the general insulation cup price to be at least twice higher.

Function

Stainless steel insulation cup with insulation and cold function, ordinary insulation cup, insulation and cold function is worse, the effect of vacuum insulation cup is much better, hot days we can use vacuum insulation cup to fill the ice water or ice, so you can enjoy the feeling of ice at any time, winter time can be filled with hot water, so you can drink hot boiling water at any time.

Stainless steel insulation cup can be customized according to the requirements, the operation is more flexible and easy, therefore, more and more people take the stainless steel insulation cup as a gift to friends, send customers, do promotion of a gift. In the cup or lid on top of their own company information or to pass blessings and other content. This kind of customized gift is being accepted by more and more people.

How to use

1, when using first add hot water (ice water), preheat or precooling, insulation effect is better.
2、The mouth of the bottle is about 3.5CM wide, easy to put ice and other food, easy and convenient to clean the inner liner.
3、Sling design, easy to carry. (Sling style)

General maintenance knowledge

1、When not in use for a long time, the insulation cup should be kept dry.
2、To prevent odor and stain, please clean and dry it after use.
3、As the use of unclean water will leave red spots similar to rust, use warm water with diluted vinegar to soak for 30 minutes and clean it.
4、Please use a soft cloth dipped in neutral detergent and moistened sponge to wipe the surface of the product, and the product must be cleaned after each use.

Cleaning method

1、It must be cleaned after each use.
2、Please clean with mild neutral detergent, do not use bleach or chlorine detergent to avoid damage to the product.

Cautions

1、Preheat or precool with a small amount of boiling water (or ice water) for 1 minute before use, the insulation and cooling effect will be better.
2、After filling the bottle with hot or cold water, make sure to close the spigot tightly to avoid leakage of water causing burns.
3、If you fill the bottle with too much hot or cold water, there will be water leakage, please refer to the instruction manual for the water location chart.
4、Please do not place it near the fire source to avoid deformation.
5、Do not put it in a place where young children can touch it, and be careful not to let children play with it, there will be a risk of burns.
6、Please be careful when putting hot drinks in the cup.
7、Do not put in the following drinks: dry ice, carbonated drinks, salt fluids, milk, milk drinks, etc.
8、When keeping hot tea hot for a long time, it will change color, so it is recommended to use tea bags etc. to brew when you go out.
9、Do not put the product into the dishwasher, dryer, microwave oven.
10、Avoid dropping the bottle and huge impact, so as not to dent the surface and cause poor insulation and other failures.
11、If the product you buy is only suitable for keeping cold, please do not add hot water insulation, so as not to cause burns.
12、If you put in food and soup containing salt, please take it out within 12 hours and clean the insulation cup.
13、It is forbidden to fill with the following things.
(1) dry ice, carbonated drinks (to avoid the rise of internal pressure, resulting in the cork can not be opened or the contents of the bottle spewed out and other dangers).
(2) lime juice, lemon juice and other acidic beverages (will cause poor insulation)
(3) milk, dairy products, fruit juice, etc. (if left too long will spoil)

Odor Removal Tips

Newly bought water cups and water bottles because the factory factory plastic open mold reasons will be some food-grade PP plastic odor, which is the normal smell of new products, the first time you can use the following methods to remove the smell.
1, boiling water deodorization method
First clean the cup with neutral detergent, then pour boiling water into the cup and leave it for two hours, and finally clean the cup.

2, milk deodorization method
First use neutral cleaning agent to clean the cup, then pour two tablespoons of fresh milk into the cup, tighten the lid, placed about four hours, and finally clean the cup.

3、Orange peel deodorization method
First use neutral detergent to clean the cup, then put fresh orange peel into the cup, tighten the lid and leave it for about four hours, and finally clean the cup.